SA 300 Accelerator for epoxy resins - 0.5Kg

SA 300 Accelerator for epoxy resins - 0.5Kg

The SA 300 is a powerful accelerator, to be used in addition to your epoxy hardener.

It allows a shorter freezing period, and dramatically reduces the drying leadtime, in opened air conditions. The SA 300 is not only fully compatible with SR SURF CLEAR hardener, but also with the blend of SD Glass-one & GRΞENPOXY.

The SA 300 works fast, without altering the mechanical performances, nor the drying steps of your resin. The more you add into your resin, the faster it will do the work !

The SA 300 must be blended with your resin before the use of a hardener. You should never pour the SA 300 directly with your hardener !

Mainly used for smaller ding repairs, hot-coating, or the fitting of inserts, you should be dosing   at least 1% of the total volume of resin used with SA 300.

Example: If you would add 1% of your resin volume with SA 300, the drying time will go from 6 hours down to 4 hours, in normal drying conditions (open air / 25°C).